
Necessary item for safety Biking on the road. (from the night identification to a Auto brake lamp)
Biking Blinker (Auto Brake Lamp) is not just a taillight. It turns itself on and off automatically and also automatically flickers in a dark place and gets even brighter when you step on the
brake so as to prevent an accident from a vehicle or a bicycle coming after your bicycle.



- Easy installation
- It does not need any connection with the
brake or other devices but can be installed the same way as a normal taillight is.

- Four stages of sensitiveness
- Reaction to the brake can be adjusted in 4 stages of sensitiveness.

- Full automation
- Power on if detecting continuous motions for 3 seconds, Power off if there are no movements detected for 7 seconds, Automatically flickering light in a dark place, Light on if reducing speed.

- Display of remaining battery level in 4 stages
- LED flickers at an interval of 3 seconds for displaying the operation state and remaining battery level.

- Tree motion modes
- 1. Automatic ON/OFF mode (daily life).
2. Continuous ON mode.
3. OFF mode (convenient when moving a bicycle) available

- Long duration
- It extends the duration even longer by adjusting the brightness, being linked With the surrounding brightness if flickering at night.
Three operations modes
Pressing the button once displays the current state.
Pressing more than twice moves to the next stage at the second press.
Each mode is converted in the order of 1 → 2 → 3 → 1 → 2.

Automatic Mode
(two LED lights are the highest location get to flicker)
It turns itself on if detecting continuous movements in a bicycle for 3 seconds and off if detecting no movements for 7 seconds. 4 LED lamps start to flicker if the detected surrounding illuminance is low and 8 LED lamps are all lighted if reducing speed.

Continuous ON Mode
(two LED lights at the second highest location get to flicker)
It does not automatically turns itself on and off but continues to be on. You can use this mode when you need lamps to continue to flicker even when your bicycle is not moving. (at this time, flickering function by the illuminance linkage and lighting function by speed reduction work the same)

Power OFF Mode
(two LED lights at the third highest location gets to flicker)
It stops all functions. You can use this mode when you need to stop your bicycle or carry it via other means of transportation.
Display of remaining battery in 4 stages
Once a movement is detected, power gets turned on and two LED lamps start to flicker once every 3 minutes. With the maximum remaining battery level, two LED lamps at the very top side get to flicker and lower LED starts to flicker for displaying each lower stage. If the lowest LED lamp is flickering, you need to replace the batteries.


Change Battery & configuration

Mode Button

Mounting Belt

Open Case Change Battery

AAA x 2 Batteries
Specification
Weight | 44g |
Operating Temp. | -20 ~ 60 ºC |
Hours of use | 100 hours |
Brightness | Flickering ON / Under 500 Lux |
Flickering OFF / Over 900 Lux | |
Reaction to speed reduction | If reducing more than 3Km/h of speed |
Power ON | Detection of continuous motions for 3 seconds |
Power OFF | No detection of continuous motions for 7 seconds |
Origin | Made in Korea |
Warranty | 1 Year |